NSC - Non Stop Cleaning is a scrubbing water recycling system installed directly on board the floor scrubber

Reduction in the environmental impact connected to floor cleaning operations

Two Basic and Premium versions. The latter features membrane filters for an additional filtration stage that can obtain water with even greater purification so that the machine operates with clear water

Reduction in consumption of water, which with C85 NSC can be reused for a week (with estimated use of 3 hours a day)

Reduction in unproductive times when the operator has to continually empty and refill the tanks of the scrubber dryer

Reduction in costs connected to the use of clean water

Reduction in costs connected to managing waste water from cleaning floors

Reduction in the use of the chemical product for scrubbing floors

Two different brush head types to get optimal results on any floor: scrubbing or scrubbing-sweeping

Intuitive driving and simple controls

Working program selector enables the operator to manually select the type of activity to be carried out

Working position raised and decentralized to improve visibility during cleaning operations

The steering wheel, new generation drive pedal and seat with super comfortable armrests ensure maximum comfort for the operator even when the scrubbing machine is used for long periods

Front and rear LED headlights as standard to guarantee maximum visibility

Front motorwheel in AC with antiskid and non-marking wheel to ensure maximum adherence on any type of floor, even when wet

Steel frame coated with cataphoretic paint which provides it with remarkable resistance to corrosion

Continuous sensor positioned on the steering wheel axle that recognizes the exact position of the front motorwheel, automatically reducing the speed in accordance with requirements, so that C85 NSC can also move forward in a fluid manner, without interruption

Brush head made of steel, to provide robustness and reliability over time

Parts requiring daily maintenance distinguished by yellow color

Hydraulic brake which acts on the rear wheels, thus increasing safety and comfort

Electric brake installed on the front motorwheel that functions as an emergency brake or parking brake

Moving scrubbing brush head: on activating a simple control, the brush head comes out to the right to reach the dirt that settles up against walls (C85 B NSC)

C85 B NSC is available in a scrubbing version with 2 disc brushes with 85 cm working width

C85 BS NSC is equipped with scrubbing sweeping brush head: particularly suitable for scrubbing rough floors or with small solid debris.

CSF - Constant solution flow: the distribution system that ensures correct delivery of solution on both disc brushes, thereby improving effectiveness even at low flow rates

Emergency button to immediately stop the machine and all active functions in an emergency

Stop&Go: when the machine is temporarily idle, the solution flow is interrupted and the brushes are halted so as to optimize consumption and reduce waste

CFC - Comac Fleet Care: fleet management system that allows remote control of machine status

Antibacterial tanks: additive included when molding the tanks that allows the bacterial load to be kept at lower average levels than on standard tanks

PM - Pressure Monitoring: system for monitoring the pressure on the brushes